Nibble to YB Converter - Nibbles into Yottabytes
Digital Data Units - Decimal Vs Binary
| Bit Units | Byte Units | ||
|---|---|---|---|
| DECIMAL | BINARY | DECIMAL | BINARY |
| 1 Kilobit = 103 or 1000 Bits | 1 Kibibit = 210 or 1024 Bits | 1 Kilobyte = 103 or 1000 Bytes | 1 Kibibyte = 210 or 1024 Bytes |
| 1 Megabit = 106 or 10002 Bits | 1 Mebibit = 220 or 10242 Bits | 1 Megabyte = 106 or 10002 Bytes | 1 Mebibyte = 220 or 10242 Bytes |
| 1 Gigabit = 109 or 10003 Bits | 1 Gibibit = 230 or 10243 Bits | 1 Gigabyte = 109 or 10003 Bytes | 1 Gibibyte = 230 or 10243 Bytes |
| 1 Terabit = 1012 or 10004 Bits | 1 Tebibit = 240 or 10244 Bits | 1 Terabyte = 1012 or 10004 Bytes | 1 Tebibyte = 240 or 10244 Bytes |
| 1 Petabit = 1015 or 10005 Bits | 1 Pebibit = 250 or 10245 Bits | 1 Petabyte = 1015 or 10005 Bytes | 1 Pebibyte = 250 or 10245 Bytes |
| 1 Exabit = 1018 or 10006 Bits | 1 Exbibit = 260 or 10246 Bits | 1 Exabyte = 1018 or 10006 Bytes | 1 Exbibyte = 260 or 10246 Bytes |
| 1 Zettabit = 1021 or 10007 Bits | 1 Zebibit = 270 or 10247 Bits | 1 Zettabyte = 1021 or 10007 Bytes | 1 Zebibyte = 270 or 10247 Bytes |
| 1 Yottabit = 1024 or 10008 Bits | 1 Yobibit = 280 or 10248 Bits | 1 Yottabyte = 1024 or 10008 Bytes | 1 Yobibyte = 280 or 10248 Bytes |
Check Digital Data Storage Units - Smallest to Largest for details and definition for each units.
Excel Formula to convert from Nibble to YB
Apply the formula as shown below to convert from Nibble to Yottabyte.
| A | B | C | |
|---|---|---|---|
| 1 | Nibble | Yottabyte (YB) | |
| 2 | 1 | =A2 * 0.0000000000000000000000005 | |
| 3 |
Download - Excel Template for Nibble to Yottabyte Conversion
If you want to perform bulk conversion locally in your system, then download and make use of above Excel template.
Python Code for Nibble to YB Conversion
You can use below code to convert any value in Nibble to Yottabyte in Python.
nibble = int(input("Enter Nibble: "))
yottabyte = nibble * 4 / (8*1000*1000*1000*1000*1000*1000*1000*1000)
print("{} Nibble = {} Yottabyte".format(nibble,yottabyte))
yottabyte = nibble * 4 / (8*1000*1000*1000*1000*1000*1000*1000*1000)
print("{} Nibble = {} Yottabyte".format(nibble,yottabyte))
The first line of code will prompt the user to enter the Nibble as an input. The value of Yottabyte is calculated on the next line, and the code in third line will display the result.